TILE ADHESIVE SF-111
stromfix SF-111 is cement based poly- mer added tile adhesive made for fixing small and medium size tiles in internal area on floor for renovation as well as fresh work.
- Tiles : Ceramic tiles
- Surfaces : Floors
- Location : Interior
- Color : White & Grey
- Packaging : 20 Kg
- Coverage : 20 kg material will cover approx. 50 sq ft on a consistently flat surface
- Standards : S TYPE 1
- Setting Time : 24 Hrs
- Pot Life : 1/2 Hrs
- Tensile Bond Strength : 75 KN after 28 days.
Mixing and Application
Installation:
Water Ratio: 1 bag to 5 litres of clean water.
Mixing : Add stromfix tile adhesive to water and mix to make thick smooth consistency with machine. Allow to stand for 5 minutes & stir the mix again & the adhesive is ready to use. (Don't add more water to the mixture once the adhesive has exceeded its pot life.)Application: Use 6 to 10 mm notched trowel for floors. Do not apply stromfix Tile Adhesive at a bed thickness greater than 5 mm. The most important standard to keep in mind is to insure that the tile is completely bedded in adhesive with 100% coverage
TILE ADHESIVE SF-222
stromfix - SF-222 is polymer fortified wall & floor tile adhesive, which is specially formulated to produce higher bond strength suitable for fixing all types of tiles including dense bodied and fully vitrified tiles.
- Tiles : Ceramic tiles, fully vitrified tiles and porcelain.
- Surfaces : Walls and Floors
- Location : Interior and exterior (providing surfaces are not subject to movement)
- Color : White & Grey
- Packaging : 20 Kg
- Coverage : 20 kg material will cover approximately 50 sq ft on a consistently flat surface.
- Standards : S TYPE 1
- Setting Time : 24 Hrs
- Pot Life : 1 Hrs
- Tensile Bond Strength : 1.0 N/mm 2 after 28 days
Mixing and Application
Installation:
Water Ratio: 1 bag to 5 litres of clean water.
Mixing : Add stromfix tile adhesive to water and mix to make thick smooth consistency with machine. Allow to stand for 5 minutes & stir the mix again & the adhesive is ready to use. (Don't add more water to the mixture once the adhesive has exceeded its pot life.)Application: Use 6 to 10 mm notched trowel for floors. Do not apply stromfix Tile Adhesive at a bed thickness greater than 5 mm. The most important standard to keep in mind is to insure that the tile is completely bedded in adhesive with 100% coverage
TILE ADHESIVE SF-333
stromfix - SF-333 is High Tensile Strength Tile Adhesive, polymer fortified for wall & floor. It has extremely high tensile strength for fixing large format tiles, stone, marble & porcelain tiles.
- Tiles : Larger format tiles, stone, marble Porcelain tiles.
- Surfaces : Walls and Floors
- Location : Interior and exterior
- Color : White & Grey
- Packaging : 20 Kg
- Coverage : 20 kg material will cover approximately 50 sq ft on a consistently flat surface.
- Standards : S TYPE 1
- Setting Time : 24 Hrs
- Pot Life : 1 Hrs
- Tensile Bond Strength : 1.3 N/mm 2 after 28 days.
Mixing and Application
Installation:
Water Ratio: 1 bag to 5 litres of clean water.
Mixing : Add stromfix tile adhesive to water and mix to make thick smooth consistency with machine. Allow to stand for 5 minutes & stir the mix again & the adhesive is ready to use. (Don't add more water to the mixture once the adhesive has exceeded its pot life.)Application: Use 6 to 10 mm notched trowel for floors. Do not apply stromfix Tile Adhesive at a bed thickness greater than 5 mm. The most important standard to keep in mind is to insure that the tile is completely bedded in adhesive with 100% coverage
TILE ADHESIVE SF-444
stromfix - SF-444 Flex is a high performance, flexible adhesive with a high polymer loading. it is designed to install glass mosaics, stone, porcelain, fully vitrified and other dense bodied tiles over substrates.
- Tiles : : Larger format tiles, stone, marble, mosaic,ceramic tiles and fully vitrified tiles
- Surfaces : Walls and Floors
- Location : Interior and exterior
- Color : White & Grey
- Packaging : 20 Kg
- Coverage : 20 kg material will cover approximately 50 sq ft on a consistently flat surface.
- Standards : S TYPE 1
- Setting Time : 24 Hrs
- Pot Life : 1 Hrs
- Tensile Bond Strength : 2 3 N/mm 2 after 28 days
Mixing and Application
Installation:
Water Ratio: 1 bag to 5 litres of clean water.
Mixing : Add stromfix tile adhesive to water and mix to make thick smooth consistency with machine. Allow to stand for 5 minutes & stir the mix again & the adhesive is ready to use. (Don't add more water to the mixture once the adhesive has exceeded its pot life.)Application: Use 6 to 10 mm notched trowel for floors. Do not apply stromfix Tile Adhesive at a bed thickness greater than 5 mm. The most important standard to keep in mind is to insure that the tile is completely bedded in adhesive with 100% coverage
EPOXY GROUT
Epoxy grout is stain free,color-fast chemical resistant for use with ceramic & vitrified tiles,marble and stone.It is a 2 component get base epoxy grout consisting hardener,resin with filler of various types of color.STROMFIX epoxy grout is suitable for all type of tiles in green buildings.
- Tiles : : Larger format tiles, stone, marble, mosaic, ceramic tiles and fully vitrified tiles
- Surfaces : Walls and Floors
- Location : Interior and Exterior
- Color :
- Packaging : 5 Kg
- Coverage :
- Standards : S TYPE 1
- Setting Time : 45 min and varies depending upon atmospheric temprature
- Pot Life : 1/2 Hrs
- Tensile Bond Strength : 2 3 N/mm 2 after 28 days.
Mixing and Application
Installation:
Water Ratio: 1 bag to 5 litres of clean water.
Mixing : Add STROMFIX tile adhesive to water and mix to make thick smooth consistency with machine. Allow to stand for 5 minutes & stir the mix again & the adhesive is ready to use. (Don't add more water to the mixture once the adhesive has exceeded its pot life.)Application: Choose a Grout color,apply grout,hold grout float at 90-degree angle,Sweep the float diagonally across the files to remove any excess grout wipe tile with a damp sponge.Use a damp cloth remove the haze,let grout dry and then apply sealer
Shreeji Chemicals